Alarms

Module System Options

All systems are custom made to suit individual requirements.

Interactive Demo

Click on the image to run the interactive options demo.

 

Datasheet

Download datasheet

 

 
 

Self Powered Systems

In order to give full protection to vehicles with exposed or easy to access batteries, the alarm system fitted needs to be a self powered system with its own built in battery. This ensures that the alarm system is not dependent on the vehicles batteries in the event that they are disconnected.

Should this occur, the PS25 Loadalarm will immediately go into alarm condition and will only reset if cancelled by the keyswitch. (Subject to the software programming requirements and with the vehicle battery reconnected). Alternatively, if the system is not reset then it will continue to run until the internal battery is exhausted, approximately 3 hours.

The control box contains maintenance free jelly acid batteries and are kept in fully charged condition by a specially developed float charging circuit.

The box is a compact unit which can be fitted into either the load compartment or the cab. The sounder can be reversed in the control box to vent externally (through an aluminium louvre), or alternatively can be vented into the cab space or load compartment.

PS25 LoadAlarm

Self powered alarm system - ideal for trailers and rigids.

What are your options when you need to leave your load overnight or just unhook the trailer for any length of time?

Your load is at risk, particularly when left unattended, which is why we've developed an extensive range of Load Area alarm components for creating an ideal system to keep watch over your load and monitor criminal activity.

The PS25 Loadalarm "Goods In Transit" system is completely self powered with failsafe battery backup, recharged via a choice of solar power, tractor supply or both.

The control unit, battery and siren are mounted inside the vehicle within a tamper proof control box manufactured from zinc plated steel for maximum rust prevention and durability.

The 122dB siren can be vented into the load area or externally, according to preference.

System installation is to BS6803 Part3 Code of Practice.

We believe that each security situation is unique, so call our experts to discuss your individual requirements.

Features

Suitable for 12V or 24V vehicles.
Versatile range of operating modes - Manual or Auto arming. Single or Twin zone, ie Cab / Load area independently armed - Trailer mode.
"KABA 20" High Security key switches with over 100 million differs and a free key registration system only enabling signatories to obtain extra keys.
Ignition monitor and starter immobilisation.
Integral battery maintains full alarm functionality.
Alarm diagnostics / history.
Panic alarm option.
Ultrasonic omit.
Vehicle battery disconnect monitor.
Continual key circuit monitoring.
Contact or Magnetic switches to all opening points as required.
All door circuit inputs can be wired negative or positive switching.
All door circuit inputs can be wired open or closed circuit.
Load compartment doors alarmed whilst vehicle is being driven.
Installed to comply with BS6803 Part 3.
Additional optional equipment
 
- shock sensors
- panic buttons
- secondary sounder
- auto brake lock valve
 
© 2010 Maple Fleet Services Ltd - all rights reserved - web design by Tech-nique
Deadlocks | Slamlocks | Van Locks | Truck Locks | Trailer Locks